可提供此产品的更新版本

open-in-new
功能与比较器件相同但引脚有所不同
预发布 具有 119db 动态范围的低功耗立体声音频 dac similar performance available in qfn package

产品详情

number of dac channels 2 analog inputs 0 analog outputs 2 dac snr (typ) (db) 123 sampling rate (max) (khz) 200 control interface i2c, spi, tdmca resolution (bits) 32 architecture advanced segment operating temperature range (°c) -25 to 85 rating catalog
number of dac channels 2 analog inputs 0 analog outputs 2 dac snr (typ) (db) 123 sampling rate (max) (khz) 200 control interface i2c, spi, tdmca resolution (bits) 32 architecture advanced segment operating temperature range (°c) -25 to 85 rating catalog
28 79.56 mm² 10.2 x 7.8
  • 32-bit resolution
  • analog performance:
    • dynamic range: 123 db
    • thd n: 0.0005%
  • differential current output: 3.9 mapp
  • 8× oversampling digital filter:
    • stop-band attenuation: –98 db
    • passband ripple: ±0.0002 db
  • sampling frequency: 10 khz to 200 khz
  • system clock: 128, 192, 256, 384, 512, or
    768 fs with autodetect
  • accepts 16-, 24-, and 32-bit audio data
  • pcm data formats: standard, i2s, and left-
    justified
  • dsd format interface available
  • interface available for optional external digital
    filter or dsp
  • tdmca or serial port (spi™/i2c)
  • user-programmable mode controls:
    • digital attenuation:
      0 db to –120 db, 0.5-db/step
    • digital de-emphasis
    • digital filter roll-off: sharp or slow
    • soft mute
    • zero flag for each output
  • compatible with pcm1792a and pcm1796
    (pins and mode controls)
  • dual supply operation:
    • 5-v analog, 3.3-v digital
  • 5-v tolerant digital inputs
  • small ssop-28 package
  • 32-bit resolution
  • analog performance:
    • dynamic range: 123 db
    • thd n: 0.0005%
  • differential current output: 3.9 mapp
  • 8× oversampling digital filter:
    • stop-band attenuation: –98 db
    • passband ripple: ±0.0002 db
  • sampling frequency: 10 khz to 200 khz
  • system clock: 128, 192, 256, 384, 512, or
    768 fs with autodetect
  • accepts 16-, 24-, and 32-bit audio data
  • pcm data formats: standard, i2s, and left-
    justified
  • dsd format interface available
  • interface available for optional external digital
    filter or dsp
  • tdmca or serial port (spi™/i2c)
  • user-programmable mode controls:
    • digital attenuation:
      0 db to –120 db, 0.5-db/step
    • digital de-emphasis
    • digital filter roll-off: sharp or slow
    • soft mute
    • zero flag for each output
  • compatible with pcm1792a and pcm1796
    (pins and mode controls)
  • dual supply operation:
    • 5-v analog, 3.3-v digital
  • 5-v tolerant digital inputs
  • small ssop-28 package

the pcm1795 device is a monolithic cmos integrated circuit that includes stereo digital-to-analog converters (dacs) and support circuitry in a small ssop-28 package. the data converters use ti’s advanced segment dac architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. the pcm1795 provides balanced current outputs, letting the user optimize analog performance externally. the pcm1795 accepts pulse code modulation (pcm) and direct stream digital (dsd) audio data formats, thus providing an easy interface to audio digital signal processors (dsps) and decoder chips. the pcm1795 device also interfaces with external digital filter devices such as the df1704, df1706, and the pmd200 from pacific microsonics&trade. sampling rates up to 200 khz are supported. a full set of user-programmable functions is accessible through an spi or i2c serial control port that supports register write and readback functions. the pcm1795 device also supports the time-division-multiplexed (tdm) command and audio (tdmca) data format.

the pcm1795 device is a monolithic cmos integrated circuit that includes stereo digital-to-analog converters (dacs) and support circuitry in a small ssop-28 package. the data converters use ti’s advanced segment dac architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. the pcm1795 provides balanced current outputs, letting the user optimize analog performance externally. the pcm1795 accepts pulse code modulation (pcm) and direct stream digital (dsd) audio data formats, thus providing an easy interface to audio digital signal processors (dsps) and decoder chips. the pcm1795 device also interfaces with external digital filter devices such as the df1704, df1706, and the pmd200 from pacific microsonics&trade. sampling rates up to 200 khz are supported. a full set of user-programmable functions is accessible through an spi or i2c serial control port that supports register write and readback functions. the pcm1795 device also supports the time-division-multiplexed (tdm) command and audio (tdmca) data format.

下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 ti 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 6
类型 标题 下载最新的英语版本 日期
* 数据表 | 2015年 3月 16日
证书 2024年 6月 19日
白皮书 2018年 6月 28日
应用手册 2008年 10月 16日
应用手册 2000年 9月 27日
应用手册 2000年 9月 27日

设计和开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

仿真模型
slem006.zip (26 kb) - ibis model
模拟工具

pspice-for-ti — 适用于 ti 设计和模拟工具的 pspice®

pspice® for ti 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 cadence® 的模拟分析引擎。pspice for ti 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 pspice for ti 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型九游会国际娱乐的解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。

在 pspice for ti 设计和仿真工具中,您可以搜索 ti (...)
封装 引脚 cad 符号、封装和 3d 模型
28

订购和质量

包含信息:
  • rohs
  • reach
  • 器件标识
  • 引脚镀层/焊球材料
  • msl 等级/回流焊峰值温度
  • mtbf/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息:
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 ti 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 ti 工程师九游会国际娱乐的技术支持的 ti e2e™ 论坛

所有内容均由 ti 和社区贡献者按“原样”提供,并不构成 ti 规范。请参阅。

如果您对质量、包装或订购 ti 产品有疑问,请参阅 。​​​​​​​​​​​​​​

视频系列

视频